TM 9-6115-729-10
0005 00
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS Continued
GENERATOR SET CONTROL Continued
Table 2. Generator Set Control Controls and Indicators Continued.
CONTROL OR
KEY
INDICATOR
FUNCTION
15
ENGINE METER
Stops scrolling of engine condition data shown on lower display. Pointer flashes to
indicate that scrolling is stopped. Pressing key again resumes scrolling. Sequence
of reported data is as follows:
Fuel filter run hours
Oil filter run hours
Battery voltage
Engine run hours
Engine rpm
Engine oil pressure
Engine coolant temperature
16
LAMP TEST
Performs lamp test on GSC. Eight fault indicators are on continuously and all
segments of upper display and lower display are on.
17
ALARM CODES
If FAULT ALARM light is flashing, pressing this key displays diagnostic code
(WP 0009 00) in
upper display. Pressing key again resumes display of
generator
output information. If FAULT ALARM light is off, this key has no function.
18
EXIT
Service Mode. FOR MAINTENANCE PERSONNEL USE ONLY.
19
SERVICE MODE
Service Mode. FOR MAINTENANCE PERSONNEL USE ONLY.
0005 00-9