ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
(10) If replacing cylinder head, remove the following:
(a) Remove plunger and holder from stud.
(b) Remove all studs.
(c) Remove valve rocker arm assembly, refer to paragraph 5.12.a.
(d) Remove intake and exhaust valves, refer to paragraph 5.14.a.
b. Inspection.
(1) Inspect cylinder head for nicks, pitting, corrosion, carbon build-up, and other damage.
(2) Using dye penetrant (Item 8, Appendix E), check cylinder head for cracks, paying particular
attention to areas around valve and fuel injector ports.
(3) Replace cylinder head if damaged.
c. Installation.
(1) If removed, install the following:
