ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Section III. OPERATOR MAINTENANCE PROCEDURES
Subject
Para.
Page
Instrument Fuse (F1) .........................................................3.3
INSTRUMENT FUSE (F1).
a. Removal.
(1)
Shut down generator set.
(2)
Release instrument cover by turning fastener, open instrument cover.
(3)
Remove cap and fuse (Figure 3-1).
b. Inspection.
(1)
Inspect fuse (Figure 3-1) for cracks and burned out element.
Discard fuse if defective.
If
necessary, remove spare fuse from spare fuse holder.
NOTE
If there is no fuse in the spare fuse holder, contact maintenance for the proper
replacement.
(2)
Inspect contacts in cap and fuse holder for evidence of corrosion and damage. If corroded or
damaged, contact Unit maintenance for repair.
c. Installation.
(1)
Insert fuse into fuse holder and install cap (Figure 3-1).
(2)
Close and secure instrument cover.
