ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
5-26
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove fuel tank, refer to paragraph 5.7.1.a.
(3)
Inspect fuel tank (7, Figure 5-2) for leaks, cracks, missing hardware, and other damage.
(4)
If damage is found, replace fuel tank (7).
(5)
Install fuel tank, refer to paragraph 5.7.1.c.
c.
Installation.
(1)
Uncover openings in fuel tank (7, Figure 5-2).
(2)
Apply sealing compound (Item 22, Appendix E) to threads of fitting studs (11). Install bushings
(13), washers (12), and fitting studs (11) on fuel tank (7). Torque fitting studs (11) to 40 inch-
pounds.
(3)
Apply sealing compound (Item 22, Appendix E) to threads of tee (10). Install tee on fitting stud
(11) on fuel tank (7).
(4)
Apply sealing compound (Item 22, Appendix E) to threads of fitting (9). Install tee on fitting
stud (11) on left side of fuel tank (7).
(5)
Apply sealing compound (Item 22, Appendix E) to threads of fitting (8). Install fitting on fitting
stud (11) on right side of fuel tank (7).
(5)
Install fuel pickup, paragraph 4.11.6.
(6)
Install fuel level sender, paragraph 4.11.5.
(7)
Position fuel tank (7) in skid base.
(8)
Secure fuel tank (7) to skid base with holddown assemblies (6), washers (5), bolts (4), washers
(3), lockwashers (2), and bolts (1).
(9)
Install fuel drain valve, paragraph 4.11.4.
(10) Install engine and generator assembly, paragraph 5.4.2.
(11) Service fuel tank. Refer to Table 4-1 for proper fuel.
(12) Connect negative battery cable to battery, and close BATTERY ACCESS door.
