ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-178
4.11.6 Fuel Pickup.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable from battery.
(3)
Open right side engine compartment access doors (Figure 1-2).
(4)
Disconnect hose (50, Figure 4-26) from elbow (56).
NOTE
Mark position of fuel pickup before removing.
(5)
Remove screws (51), lockwashers (52), washers (53), fuel pickup (54), and gasket (55) from fuel
tank.
(6)
Remove elbow (56) from fuel pickup (54).
(7)
Cover opening in fuel tank.
b. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove fuel pickup, step a above.
(3)
Inspect fuel pickup for clogs, stripped threads, and other damage.
(4)
Replace damaged parts.
(5)
Install fuel pickup, step c below.
c. Installation.
(1)
Remove cover from fuel tank opening.
(2)
Thoroughly clean mating surfaces for new gasket (55, Figure 4-26). Ensure no foreign material
enters fuel tank. Apply sealant (Item 21, Appendix E) to both sides of gasket. Position gasket on
fuel tank.
(3)
Install elbow (56) on fuel pickup (54).
(4)
Install fuel pickup (54), washers (53), lockwashers (52), and screws (51) on fuel tank.
(5)
Connect hose (50) to elbow (56).
(6)
Close engine compartment access doors.
(7)
Connect negative battery cable to battery, and close BATTERY ACCESS door.
