ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-158
b. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open engine compartment access doors (Figures 1-2 and 1-3).
(3)
Inspect fan guards (4 and 5, Figure 4-23), brackets (6, 7, 8, 9, 10 and 11), and attaching hardware
for damage, corrosion, and loose or missing hardware.
(4)
Replace all damaged and missing components. Tighten all loose attaching hardware.
(5)
If necessary, install new protective edging (15), cut to fit.
(6)
Close engine compartment access doors.
c. Installation.
(1)
Install brackets (7 and 8, Figure 4-23), washers (12), lockwashers (13), and bolts (14) on shroud.
(2)
Install bracket (6), washer (12), lockwasher (13), and bolt (14) on engine.
(3)
Install left fan guard (4), lockwashers (3), washers (2), bolts (1) on brackets (6, 7, and 8).
(4)
Close left side engine compartment doors.
(5)
Install brackets (10 and 11), washers (12), lockwashers (13), and bolts (14) on shroud.
(6)
Install bracket (9), washer (12), lockwasher (13), and bolt (14) on engine.
(7)
Install right fan guard (5), lockwashers (3), washers (2), bolts (1) on brackets (10 and 11).
(8)
Close right side engine compartment access doors.
(9)
Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.10.4 Coolant Hoses, Upper
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable.
(3)
Open engine compartment access doors (Figures 1-2 and 1-3).
