ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-105
(8)
Install control box top panel, paragraph 4.7.2.
(9)
Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.8.20 CONVENIENCE RECEPTACLE J1.
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove DCS control box top panel, paragraph 4.7.2.
(3)
Inspect CONVENIENCE RECEPTACLE (23, Figure 4-14) for cracks, breaks, corrosion, bent
terminals, and other indications of damage.
(4)
Inspect cover (20) for cracks, corrosion, and damaged springs.
(5)
Replace defective parts.
(6)
Install DCS control box top panel, paragraph 4.7.2.
b. Testing.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove DCS control box top panel, paragraph 4.7.2.
(3)
Remove locknuts (18, Figure 4-14), screws (19), and cover (20) from DCS control panel frame (4).
(4)
Remove locknuts (21), screws (22), and CONVENIENCE RECEPTACLE (23) from DCS control
panel frame (4).
(5)
Tag and disconnect electrical leads from CONVENIENCE RECEPTACLE (23).
(6)
Set multimeter for ohms, and check for continuity between upper side terminals and lower side
terminals of each plug outlet.
(7)
Replace CONVENIENCE RECEPTACLE if continuity is not indicated between terminals.
(8)
Connect electrical leads to CONVENIENCE RECEPTACLE (23), and remove tags.
(9)
Install DCS control box top panel, paragraph 4.7.2.
c. Replacement.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable.
(3)
Remove DCS control box top panel, paragraph 4.7.2.
(4)
Remove locknuts (18, Figure 4-14), screws (19), and cover (20) from DCS control panel frame (4).
