ARMY TM 9-6115-670-14&P
6-57
REPAIR
a. Use small end bushing tool to remove small end bushing (1, Figure 6-20) from connecting rod
(2).
b. Use small end bushing tool to install new small end bushing (1) into connecting rod (2).
Figure 6-20. Connecting Rod (Sheet 3)
REPLACE
a. Remove two snap rings (3) from piston pin (1), Figure 6-20, Sheet 4.
b. Remove piston pin (1) and connecting rod (2) from piston (4).
c. Install connecting rod (2) in piston (4) and secure with piston pin (1).
d. Secure piston pin (1) with two snap rings (3).
