ARMY TM 9-6115-670-14&P
6-8
Figure 6-2. Cylinder Head (Sheet 2)
REPLACE
a. Refer to Figure 6-2 (sheets 3 and 4) and remove 14 bolts (2, sheet 4) securing cylinder head
(1) to engine block in the following order (sheet 3): 10, 14, 13 through 11, 9 through 1. Retain
hardware.
b. Remove cylinder head (1, sheet 2) from engine block.
c. Remove head gasket (3, sheet 4) from cylinder head (1). Ensure there is no debris on engine
block. Clean cylinder head thoroughly if required.
CAUTION
Refer to Figure 6-2 (Sheet 3) and observe sequence of
cylinder head bolts removal to ensure proper
installation.
