TM 9-6115-670-14&P
5-83
Table 5-2. Engine Wiring Harness P1 Continuity Test
Termination
Termination
Termination
Wire Ref
No.
From
To
Wire Ref
No.
From
To
Wire Ref
No.
From
To
1
P1-A
P4-A
6
P1-F
P4-C
11
P1-N
WTS
2
P1-B
P4-B
7
P1-J
SB
12
P1-P
P8-A
3
P1-C
P5
8
P1-K
ALT
13
P1-R
P7-B
4
P1-D
STR
9
P1-L
GP
14
P1-S
P7-D
5
P1-E
AF
10
P1-M
MH
15
P1-T
P7-A
16
P1-U
P8-B
18
P1-W
TS
17
P1-V
OPS
19
P1-X
P7-C
REPAIR
Refer to para 5.25. for repair of Engine Wiring Harness P1.
REPLACE
a. Tag and disconnect connectors P1 (5), P4 (3), P5 (4), P7 (1), and P8 (2).
b. Tag and disconnect nine electrical leads (6).
c. At generator coupling, remove one bolt (12), washer (11), nut (7), lock washer (8), lifting eye
(9), and wire loop clamp (10).
d. Remove screw and lock washer (13) securing wire loop clamp (14) to injection nozzle lines (15)
and remove wire clamp (14).
e. Cut and remove tiedown straps securing wiring harness.
f. Remove wiring harness
CAUTION
Take care not to cut wires or other APU components
when removing tiedown straps.
NOTE
When removing, make note of tiedown strap locations.
Wiring harness will need to be secured at approximately
the same places.
NOTE
Cut and remove tiedown straps as needed to remove
wiring harness.
