TM 9-6115-669-13&P
INSTALLATION
a.
Install PDU electronic assembly N6 (19) with four nuts (20).
b.
Install boards (13, 14, l5, l6 and 17) following to figure 5-17.
N O T E
The overcurrent detection boards are identical and interchangeable
with one another.
c.
Install panel (12), angle pieces (11), washers (10), serrated lock washers (9) and screws (8).
d.
Install protective cover (7) and secure with screw (4), serrated lock washer (5) and washer (6).
e. Remove stanchion.
f.
Stow prop (3), close access door (2) and secure.
g.
Install stanchion by PDU (1).
h.
Connect load bank to generator set and perform procedures in paragraph 4.34.
Change 1
5-49