TM 9-6115-669-13&P
4.33 CABINET ILLUMINATION S5/H11MAINTENANCE.
This task covers:
a.
Removal
b.
Installation
General Mechanic’s Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool
Kit (item 3, appendix B)
Reference
Shut down Generator Set
150 kW, paragraph 2.8.1.
None
Two
WARNING
The Generator Sets 150 kW produce lethal voltages.
Turn off power to the EPP III or Generator Set 150 kW before
performing any installation, removal, disassembly, or
assembly work.
Wear protective gloves when performing any work on main
assemblies of the EPP III.
CAUTION
Label all cables before removing electrical or electronic assemblies or
components.
a.
Remove stanchion by PDU (1, figure 4-47).
b. Open access door (2) and secure with prop (3).
c. Install stanchion.
SWITCH 85
a. Record labeling and position of cables of switch S5 (4), loosen screws and remove cables.
b.
Remove screws (5), serrated lock washers (6) and switch S5 (4).
ILLUMINATION H11
a. Insert screwdriver in slot on cover (11), turn slot and remove cover (11) off lamp base (7).
b. Remove bulb (12) and unplug two cables from lamp base (7).
c.
Remove two nuts (10), serrated lock washers (9), washers (8) and lamp base (7).
4-109
