TM 9-6115-669-13&P
Inspect for damage and discoloration due to heat.
Use multimeter to check continuity resistance. Continuity must be present when breaker is
actuated; resistance must be infinity when breaker is not actuated.
a.
Insert circuit breaker F1 (10) into top of mounting bar (9) and push in at the bottom.
b.
Install cables on circuit breaker F1 (10) and tighten screws.
c.
Install protective cover (7) and secure with screw (4), serrated lock washer (5) and washer (6).
d. Remove stanchion.
e.
Stow prop (3), close access door (2) and secure.
f.
Install stanchion by PDU (1).
4-107
