TM 9-6115-669-13&P
Section II. SERVICE UPON RECEIPT OF EQUIPMENT
4.4 SERVICE UPON RECEIPT TO OF MATERIEL.
4.4.1 Storage and Transport on Original Packaging.
The Generator Set 150 kW and pallet frame are packed separately, each in a wooden container
(figure 4-1). The container is covered at the top by rainwater protection film (1). The packing list is
located below the plate (2). The container is labeled with the necessary logistical identifiers (5).
4.4.2 Transport.
CAUTION
The container is designed for transportation in a horizontal position
only (4).
a.
When transporting with a forklift, insert forks into openings (6).
b.
When transporting with a crane, attach slings to (3).
WARNING
Do not stand in the operating area of the crane or forklift. Do
not walk under the suspended load.
Move the container slowly so that it remains in the
horizontal position.
4.4.3 Storage.
The container can be stored in the original packaging for up to two years. The unit is packaged in
airtight materials meeting MIL standards. The packaging can be checked at regular intervals using
the moisture indicator (8), as follows:
a.
Open protective grill (7).
b.
The indicator must be blue in color. If the indicator is entirely or partly pink, proceed as
indicated for 30%, 40%, and 50% relative humidity.
c.
Close protective grill (7).
NOTE
The Generator Set 150 kW is packaged with a residual amount of fuel
and with battery terminals detached.
4-4
