TM 9-6115-669-13&P2.6.3 Check Diesel Engine Oil Level before starting Engine.N O T EEngine oil must be checked on level surface.a.Open flap (1, figure 2-15).b.Remove dipstick (4) from tube and wipe off with cloth.N O T EOil level must reach to upper dot marking (5).c.Insert dipstick (4) into tube until it stops, then remove and read off oil level.CAUTIONIf the oil level reaches only to lower dot marking (6), immediately addoil of the same specification.d.Insert dipstick (4) back into tube until it stops.e.Unscrew cap (2) from oil filler neck (3).CAUTIONDo not mix oils of different specifications.Use a cloth to catch any oil overflows.Check oil level frequently while adding;do not go above upper dot marking (5).f.Place funnel in oil tiller neck (3) and add oil of correct specification for the engine(refer to TM 9-6115-668-13).g.Remove funnel from oil filler neck (3) and screw on cap (2).h. Close flap (1).2 - 43
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
