TM 9-6115-664-13&P
5-17. OIL COOLER MAINTENANCE
C.
INSTALLATION.
1.
Install eight split bushings (14, Figure 5-11) onto
oil cooler (7) using silicon.
2.
Mate rear portion of two-piece cooler mounting
blocks (11) to enclosure and secure using four
screws (8), lockwashers (9), and washers (10).
3.
Mate oil cooler (7) to rear portion of block (11).
Install front portion of block using six screws (12)
and lockwashers (13).
4.
Install oil cooler guard (3) using eight screws (4),
washers (5), and nuts (6).
5.
Install soundproofing material (1) and secure using
dome washers (2).
6.
Install engine/alternator assembly and engine
mounts (Para. 5-7).
7.
Connect oil cooler hoses (Para. 4-38).
Figure 5-11. Oil Cooler
5-59/(5-60 blank)
