TM 9-6115-664-13&P
4-43. ENGINE AIR FILTER MAINTENANCE
3.
Inspect intake guard for damage. Ensure mesh
screen is intact. Replace as required.
C.
INSTALLATION.
NOTE
Screws (15, Figure 4-33) are installed
from different sides of the filter base.
Screw in rear hole mounts from the
top of the filter base. Two screws in
front holes mount from below the
filter base.
1.
Mate filter base (4) to backing plate (14). Secure
using three screws (15), six washers (16), and three
nuts (17).
2.
Apply loctite adhesive to threads of bolts (11) and
both ends of setscrew (13). Install filter base (4) and
backing plate (14) using three bolts (11) and
lockwashers (12). Install setscrew (13) and nut (9).
3.
If removed, install wing screw assembly (5) and
washer (6) onto filter cover (2) using retainer (7).
4.
Install filter (8) and filter cover (2) onto base (4).
Ensure filter is properly seated.
5.
Secure filter cover (2) to base (4) by screwing in
wing screw assembly (5).
6.
Connect engine air hose (1) to filter cover (2) and
enclosure duct. Secure by tightening clamps (3).
7.
Close top front cover and lock using latches.
Figure 4-33. Engine Air Filter
4-105
