TM 9-6115-664-13&P
4-42.
ENGINE EXHAUST DUCT ASSEMBLY MAINTENANCE
This task covers inspection and repair.
INITIAL SETUP
Tools:
Equipment Condition:
Shop Equipment, Automotive Maintenance
Air Filter and Filter Base Removed (Para. 4-43)
and Repair (Item 1, App. B)
Parts/Materials:
Adhesive, Silicon (Item 2, App. E)
A.
REMOVAL.
WARNING
Make sure that electrical cable is
disconnected from NATO receptacle
before performing any maintenance
action. Failure to do so can result in
electrical shock.
NOTE
Discard and replace all lockwashers
and locknuts when removed.
1.
Remove screw (10, Figure 4-32), washer (11), and
lockwasher (12) and release engine exhaust bellows
(1) from air duct (2, located in valve access door).
2.
If replacement is required, remove exhaust bellows
(1) from air outlet duct (3) by drilling out rivets.
3.
Remove two bolts (4), lockwashers (5), and washers
(6).
4.
Remove air outlet duct (3) by removing two bolts (7),
lockwashers (8), and washers (9).
Figure 4-32. Exhaust Duct
4-102
