TM 9-6115-653-14&P
Table 4-1. Unit Preventive Maintenance Checks and Services (PMCS) (cont)
H - Hours of operation
M - Monthly
S - Semiannually
A - Annually
(As indicated
(100 hours)
(500 hours)
1,000 hours)
INTERVAL
ITEM
NO.
H
M
S
A
ITEM TO BE INSPECTED
PROCEDURES
17
Lunette
Check security of mounting Inspect ring for excessive wear
18
Safety Chains
Inspect for broken links or missing chain(s)
19
Reflectors
Replace any cracked, broken, or missing reflectors
20
Data Plates and Markings
Make sure data plates are legible and securely mounted
Replace illegible data plates
21
Landing Leg
Inspect landing leg and brace for bent or broken parts
22
Leveling Jacks
Inspect leveling lacks for bent or broken parts
23
Suspension Assemblies
a.
Inspect shackles, bearings, pins, leaf springs and spring
eyes for damage or broken parts
b.
Inspect mounting brackets for cracks or loose or missing
hardware
24
Axle
a.
Check for damaged axle tube
b.
Check for loose or missing U-bolts or nuts
25
Wheels and Tires
a.
Check serviceability of tires as Indicated In
TM 9-2610-200-24
b.
Tighten wheel stud nuts to 450 to 500 ft-lb
(611 to 678 Nom)
26
Brakes
a.
Inspect brake linings for wear Replace If brake shoe
lining is less than 1/8-inch (3 2 mm) thick
b.
Inspect brake adjusting screw, retaining screw, retaining
pins, springs, and clips for corrosion and wear
c.
Inspect hydraulic wheel cylinders for leaks
d.
Adjust brakes
4-11
