TM 9-6115-653-14&P
WARNING
Use care when releasing spring-loaded lower tube of leveling jacks. The lower tube will
return to retracted position with considerable force and can cause injury.
i.
Retract lower tubes of leveling jacks. Swing leveling jacks up into traveling position and secure with lockpins.
j.
Remove wheel chocks.
k.
Attach power unit to towing vehicle. Refer to TM 9-2330-205-14&P.
I.
Release trailer handbrakes.
4-4 Reinstallation After Movement. After movement to a new worksite, install power unit in accordance with
paragraph 4-2.
Section III. REPAIR PARTS, SPECIAL TOOLS, SPECIAL TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT
(TMDE)
4-5 Tools and Equipment. There are no special tools or equipment required to maintain the PU-732/M power unit.
4-6 Maintenance Repair Parts. Repair parts and equipment for maintenance of this power unit are listed and
Illustrated in the repair parts and special tools list in Appendix D of this manual.
Section IV. LUBRICATION INSTRUCTIONS
4-7 General. Detailed instructions for the lubrication of the major components of the power unit are contained in the
applicable Lubrication Orders (LO’s). Refer to DA Pam 25-30 to ensure that the latest editions of the L O 's are used. This
section contains lubrication instructions that are not included in the Lubrication Orders.
4-8 Generator Lubrication. Refer to TM 5-6115-464-12 for generator set Lubrication Order.
4-9 Trailer Assembly Lubrication.
a.
Trailer Lubrication. Refer to TM 9-2330-205-14&P for trailer Lubrication Order.
b
Personnel Platform Lubrication .The personnel platform is a modification to the standard M200A1 trailer and, as
such, does not appear in the associated L O Lubricate the personnel platform semiannually as follows:
4-7
