TM 9-6115-650-14&P
Section IV. TROUBLESHOOTING
3-10. Power Unit Troubleshooting. There are no troubleshooting procedures authorized at operator level
for the power plant end item. Troubleshooting procedures for the individual generator sets and trailer are
contained in their respective technical manuals referenced below.
a. Generator Set Troubleshooting. Refer to TM 5-6115-585-12 for troubleshooting procedures.
b. Trailer Troubleshooting. Refer to TM 9-2330-213-14&P for troubleshooting procedures.
Section V. OPERATOR/CREW MAINTENANCE
3-11. Enclosure Maintenance. Maintenance of the enclosure at operator level is limited to replacement of
the fitted cover and/or the bows.
a. Fitted Cover RepIacement. (See figures 3-1 and 3-2.)
(1) Removal.
(a)
(b)
(c)
(d)
(e)
Untie 25 ropes (1, figure 3-1) fastening fitted cover to trailer body (2).
Unfasten six straps and buckles (3) securing rear curtain (4). Roll up curtain, and secure with three
rollup straps (5) provided.
Unfasten six straps and buckles (3) securing front curtain (6). Roll up curtain, and secure with three
rollup straps (5) provided.
Roll up each side (7) of fitted cover, in turn, and secure each side with six rollup straps (5) provided.
Working under fitted cover (1, figure 3-2), unfasten 12 straps (2) securing fitted cover to bow
assemblies (3). Remove fitted cover.
(2) Installation.
NOTE
Front curtain is provided with three tie-down ropes. Rear curtain only has two ropes.
(a) Position fitted cover (1, figure 3-2) on top of bows (3) making certain front of fitted cover is at front of
trailer.
(b) Secure fitted cover (1, figure 3-2) to bow assembly (3) with 12 straps (2) provided.
(c) Unfasten rollup straps (5, figure 3-1) securing sides of fitted cover and lower both sides (7).
(d) Unfasten rollup straps (5) securing front and rear curtains (4,6) and lower both curtains.
(e) Secure front and rear curtains (4, 6) to sides (7) with six straps and buckles (3) provided on each
curtain.
(f) Secure fitted cover to trailer body (2) with 25 ropes (1) provided.
3-18
