ARMY TM 9-61154524
AIR FORCE TO 35C23-44412
MARINE CORPS TM 09244A/09245A-2412
2-12.4. Service.
a. Remove terminal covers (2, FIGURE 2-3).
b. Clean cable terminal lugs and battery posts.
c. Install terminal covers (2) on batteries (13).
2-12.5. Installation.
a. Position batteries (13, FIGURE 2-3) in generator set. Ensure that batteries are serviced and fully charged.
b. Apply general purpose grease (Item 10, Appendix C) to battery posts and cable terminal lugs (1), (6), (7), and (8)
(F) Apply petrolatum or equal.
c. Install clamps (11) and retaining bar (12) with lockwashers (14), washers (10), and nuts (9).
WARNING
Connect negative battery cable terminal lug (1) last when Installing battery cables
Failure to follow this procedure could result In sparks which can ignite volatile
battery gases.
d. Connect positive cable terminal lug (8).
e. Position interconnect battery cable and connect terminal lugs (6) and (7).
f.
Connect negative battery cable terminal lug (1) and close battery compartment access door.
2-13.
NATO SLAVE RECEPTACLE.
2-13.1. Inspection.
a. Shut down generator set.
b. Open battery access door.
c. Inspect NATO slave receptacle for loose connections, corrosion, missing hardware, and other damage.
d. Close battery access door.
2-132.
Removal.
a. Shut down generator set.
b. Open battery access door and disconnect negative battery cable.
c. Tag and disconnect battery and slave receptacle cables from slave receptacle (7, FIGURE 2-4) by removing bolts
(1) and blockwashers (2).
d. Remove bolts (5), nuts (6), and NATO slave receptacle (7) from generator set housing.
e. Remove nut (8), bolt (9), and cover (10) from generator set.
2-13.3. Installation.
a. Insert NATO slave receptacle (7, FIGURE 2-4) into generator set housing.
b. Secure receptacle (7) with bolts (5) and nuts (6).
c. Connect slave receptacle and battery cables to slave receptacle (7) with bolts (1) and lockwashers (2) Remove
tags.
d. Install cover (10) on generator set with bolt (9) and nut (8).
e. Connect negative battery cable. Close battery access door.
Change 4 2-29
