ARMY TM 9-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARlNE CORPS TM 09244A/09245A-24/2
NOTES:
1. Dimensions shown are in inches.
2. Refer to TM 9-6115-645-24P for materials required.
PROCEDURES:
1. Strip 0.125 inch of insulation from end of each switch (1 )
2. Crimp pin (2) on end of each lead.
lead.
3. Insert pins into housing (3) with lead A in position 1, lead B in position 2, lead C in position 3, and lead D in position 4.
4. Mark “Pl2” on strap (4) and install in position shown.
FIGURE D-37. Switch Assembly, Fuel Level (P/N: 88–22549)
D-37
