D-36
ARMY TM 9-6115-645-24
AIR FORCE TO 35C2-3-444-12
MARlNE CORPS TM 09244A/09245A-24/2
NOTES:
1. Refer to TM 9-6115-645-24P for materials requireded.
2. Solenoid wiring is not polarity sensitive, so position of terminals is not important.
PROCEDURES:
1. Strip 0.25 inch of insulation from end of each solenoid (1) lead.
2. Crimp terminal (2) on one end of solenoid (1) lead and terminal (3) on other end.
FIGURE D-36. Solenoid Assembly (P/N: 88-22553)