ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
2-11-2
a.
b.
c.
d.
2-11-3
a.
b.
c.
2-11-4
a.
b.
c.
d.
e.
f.
2-11-5
a.
b.
c.
Removal.
Shut down generator set.
Open battery access door and right side engine access doors.
NOTE
Tag all cables before removal.
Disconnect negative battery cable terminal lug (1, FIGURE 2-3) from battery.
Disconnect and remove applicable cable assembly as shown in FIGURE 2-3 or FIGURE 2-4.
Cleaning.
Remove terminal cover(s) (2, FIGURE 2-3) from battery post(s), if applicable.
Clean battery post(s) and cable terminals with battery terminal cleaner.
Install terminal cover(s) (2), if removed.
Repair
NOTE
If cable cannot be repaired, refer to Appendix D.
Remove nut(s) (5, FIGURE 2-3) and battery cable terminal lug(s), as necessary.
Remove broken or damaged terminal (3, FIGURE 2-3 or 2-4) from cable assembly.
Slide new shrinkable tubing (4, FIGURE 2-3 or 2-4) over cable end.
Install terminal (3) to cable end as described in Appendix D.
Heat shrinkable tubing (4) with heat gun until secure.
Install battery cable terminal lug(s) with nut(s) (5, FIGURE 2-3), as necessary.
Installation.
Install applicable cable assembly as shown in FIGURE 2-3 or 2-4.
Connect negative battery cable terminal lug (1, FIGURE 2-3) to battery.
Close access doors.
2-28
