ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
o.
u .
v.
3 .6 . 2 Installation.
a.
b.
c.
d.
e.
f .
g.
h .
Move engine and generator assembly to maintenance work area. Support assembly on maintenance stand or fix-
ture.
Remove engine shock mounts (14) from skid base by removing nuts (11), washers (12), and bolts (13).
Remove shock mounts (15) from generator mounting points on skid base.
Remove engine support bracket (5) by removing nuts (16), washers (17), and bolts (18).
Remove engine support brackets (22) by removing bolts (19), lockwashers (20), and washers (21).
Remove generator mount angles (29), plates (28), nuts (23) and (27), washers (24) and (26), and bolts (25) from
generator.
Remove bolts (30), lockwashers (31), washers (32), nuts (33), and bracket (34) from engine.
Remove bolts (35) and bracket (36) from engine.
Install bracket (36, FIGURE 3-1) on engine with bolts (35).
Install bracket (34) on engine with bolts (30), lockwashers (31), washers (32), and nuts (33).
Install engine shock mounts (14) on skid base with bolts (13), washers (12), and nuts (11).
Position generator shock mounts (15) in skid base.
Install engine support bracket (5) on engine with bolts (18), washers (17), and nuts (16). Torque nuts (16) to 31
ft-lbs (42 Nm).
Install engine support brackets (22) on engine with bolts (19), lockwashers (20), and washers (21).
Install generator mount angles (29) and plate: (28) on generator with bolts (25), washers (24) and (26), and nuts
(23) and (27).
Rated capacity of overhead hoist should be at least 2000 Ibs (907 Kg).
Arrange lifting device so that it supports both engine and generator to
avoid undue stress on the engine and generator coupling.
Attach lifting harness to engine and generator lifting points. Raise engine and generator assembly from mainte-
nance stand or fixture.
Position engine and generator assembly on skid base aligning mounting holes and brackets.
Install bolts (9). Belleville washers (10), snubbing washers (8), washers (7), and nuts (6) to secure generator to
skid base Torque bolts (9) to 210 ft-lbs (285 Nm).
3-12
