ARMY TM 9-6115-642-24
AIR FORCE TO 35C2-3-455-12
MARINE CORPS TM 09247A/09248A-24/2
NOTES:
1. Dimensions shown are in inches.
2. Tolerances are 0.1 inch unless otherwise stated.
PROCEDURES:
1.
2.
3.
Cut foam to dimensions shown.
Drill holes as shown.
Coat this edge using sealant (Item 17, Appendix C).
FIGURE D-9. Insulation, Air Discharge (P/N: 88-20294)
D-10