ARMY TM 9-6115-642-24
AIR FORCE TO 35C2-3-455-12
MARINE CORPS TM 09247A/09248A-24/2
4-8 SKID BASE.
4-8.1
Removal.
a.
Remove batteries, paragraph 2-12.2.
b. Remove generator set front housing section, paragraph 2-19.1.
c.
Remove generator set rear housing section, paragraph 2-20.1.
d. Remove fuel tank, paragraph 2-83.1.
e.
Remove engine and generator, paragraph 3-6.1.
f.
Remove clip halves (1, FIGURE 4-14) and insulation (2) from plate (5).
g.
Remove nuts (3), bolts (4), and plate (5) from skid base (6).
4-8.2 Inspection.
Inspect skid base for cracks, broken welds, corrosion, or other obvious damage.
4-8.3 Repair. Repair of skid is Iimited to corrosion control and spot welding minor cracks. More serious damage re-
quires replacement of skid base.
4-8.4
Installation.
a.
Install insulation (2, FIGURE 4-14) on plate (5) with clip halves (1).
b. Install plate (5) to skid base (6) with bolts (4) and nuts (3).
c.
Install engine and generator, paragraph 3-6.2.
d. Install fuel tank, paragraph 2-83.3.
e.
Install generator set rear housing section, paragraph 2-20.4.
f.
Install generator set front housing section, paragraph 2-19.4.
g.
lnstall batteries, paragraph 2-12.5.
4-16
SECTION VI. MAINTENANCE OF SKID BASE
