ARMY TM 9-6115-642-24
AIR FORCE TO 35C2-3-455-12
MARINE CORPS TM 09247A/09248A-24/2
2-99.2. Inspection and Testing.
a. Remove varistors, paragraph 2-99.1
b.
Inspect varistors for obvious external damage.
c
Set multimeter for ohms and test each varistor by connecting multimeter to varistor terminals 1 and
2. Note multimeter indication.
d.
Reverse multimeter leads and note multimeter indication
e
Multimeter indications should be infinite ohms in both direction.
f.
Varistors are defective and must be replaced if indications are other than above
g. Install varistors, paragraph 2-99.3.
2-99.3. Installation
a.
Install varistors (25, FIGURE 2-26). on load output terminal board assembly with bolts (41) and nuts
(40).
b
Connect varistor leads (11) to varistors (25) and remove tags
c
Install load output terminal board assembly in generator set, paragraph 2-97.4, steps k thru n
d.
Connect negative battery cable and close left side engine access door
Change 4
2-131
