ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
2-67-3. Repair.
Repair by replacing damaged hoses and clamps.
2-67-4. Installation.
a.
Install clamps (6, Figure 2-19) on generator set with bolts (8), washers (9), Iockwashers (10), and nuts (11).
b.
Install air cleaner element, paragraph 2-68-3.
c.
Place air cleaner assembly in clamps (6).
d.
Position hose (3) on air cleaner housing (7) and intake manifold.
e.
Position hose (5) on air cleaner housing (7).
f.
Tighten clamps (6) securing air cleaner assembly.
g.
Reposition hoses (3) and (5), and tighten clamps (2) and (4).
h.
Install control box top panel, paragraph 2-16-4.
i.
Connect negative battery cable and close access doors.
2-68. AIR CLEANER ELEMENT.
2-68-1. Removal.
a.
Shut down generator set.
b.
Open left side engine access door.
c.
Loosen clamp (12, Figure 2-19) and remove cap (13).
d.
Remove wing nut (14), baffle (15), and air cleaner element (16).
2-68-2. Cleaning and Inspection.
a.
Remove air cleaner element, paragraph 2-68-1.
b. Wipe inside of air cleaner housing (7, Figure 2-19) with cleaning cloth (Item 6, Appendix C).
c.
Inspect element (16) for clogs and damage, and replace as necessary.
d.
Install air cleaner element, paragraph 2-68-3.
2-68-3. Installation.
a.
Install air cleaner element (16, Figure 2-19), baffle (15), and wing nut (14).
b.
Install cap (13) and tighten clamp (12).
c.
Close engine access door.
2-100
