ARMY TM 9-6115-641-24
AIR FORCE TO 35C2-3-456-12
2-65-2. Cleaning and Inspection.
a.
Remove muffler, paragraph 2-65-1.
b.
c.
d.
e.
f.
2-65-3.
a.
b.
c.
d.
e.
f.
Dry cleaning solvent is flammable and toxic to eyes, skin, and respiratory tract.
Skin/eye protection required. Avoid repeated/prolonged contact. Good general
ventilation Is normally adequate.
Clean muffler with stiff bristle brush and dry cleaning solvent (Item 18, Appendix C).
Inspect muffler for dents, cracks, excessive corrosion, clogging, and other damage.
Inspect wrap for tears, broken or missing capstands, and other damage.
Replace damaged parts.
Install muffler, paragraph 2-65-3.
Installation.
Install muffler wrap (11, Figure 2-18) on muffler (5) with safety wire (10) in a criss-crossing pattern.
Install gasket (9), exhaust seal (6), retaining plate (7), exhaust seal spring (8), and muffler (5) at exhaust
manifold with Iockwashers (4) and bolts (3).
Secure other end of muffler (5) with Iockwashers (2) and bolts (1).
Connect negative battery cable.
Start generator set and check for exhaust leaks.
Shut down generator set and close engine access doors.
2-97
