TM 9-6115-624-BD
b.
Personnel/time required.
1-3 soldiers/1.0-6.0 hours
c.
Materials/tools.
None
d.
Procedural Steps.
(1)
Disconnect power. (Unhook negative battery terminal.)
(2)
Gain access to engine starter; remove if required.
(3)
Remove solenoid from starter (figure 7-10).
(4)
Rotate solenoid plunger shaft 180 degrees.
(5)
Install solenoid on starter.
(6)
Reconnect power.
(7)
Test starter operation.
Record the BDAR action taken. When the mission is completed, as soon as practicable, repair the generator using
standard maintenance procedures.
Figure 7-10. Starter Solenoid Defective.
7-18
