TM 55-6115-498-40
INTRODUCTION
speed (5000 rpm). The unit is self-cooled by
means of an integral fan rotating with out
a. This technical manual comprises overhaul
put shaft. A terminal board is mounted on the
instruction for DC Generator, Part No. 30B37-
housing to facilitate external connections. Slotted
37A (figure 1-1). This equipment is manu-
mounting holdes are provided for ease of instal
factured by The Bendix Corportion, Electric
lation on the engine.
power Division (Federal Code 83298), Eaton-
town, New Jersey 07724. Sections I through IV
1-5. LEADING PARTICULARS.
of this technical manual contain instructions for
Refer to table 1-1 for leading particulars of
the basic type.
.
the dc generator.
b. Report of errors, missions, and recom-
mendations for improving this publication by the
Table 1-1. Leading Particuars
individual user is encouraged. Reports should
should submitted on DA Form 2028 (Recommended
Changes DA Publications) and forwarded di-
rectly to: Commanding General, U. S. Army
Aviation Systems Command, ATTN: AMSAV-
R-M, P. 0. Box 209, St. Louis, Missouri 63166.
EQUIPMENT
RECORDS.
Repainting or retouching surfaces, if required
shall be done in accordance with talbe 1-2.
