SECTION I
INTRODUCTION AND DESCRIPTION
1-1. INTRODUCTION.
1-2. This technical manual provides all instructions necessary for the operation and
maintenance of the Dual Purpose Mobile Check and Adjustment/Generator Stand,
identified by Part Number 45977-O. The Mobile Check and Adjustment/Generator
Stand (figure 1-1), hereafter referred to as the Mobile Check Stand, is manufactured
by the Solar Division of International Harvester, 2200 Pacific Highway, San Diego,
California.
1-3. PURPOSE.
1-4. The Mobile Check Stand provides the components and controls necessary to
functionally test the Models T-62T-2 and T-62T-2A Auxiliary Power Units (APU) prior
to installation in the aircraft, or upon removal from the aircraft, or to check and adjust
the units after minor repair or overhaul. The Mobile Check Stand with either APU in-
stalled, can provide the aircraft with ac power for checkout after aircraft repair, or
for aircraft preflight checks.
1-5. ARRANGEMENT OF MANUAL.
1-6. The manual is divided into eight sections.
describes the components and their functions. Section II gives the procedures neces-
sary to prepare the equipment for use. Section III describes the adjustments required
and the connections necessary for operating the equipment. Section IV lists the inspec-
tions and preventive maintenance procedures required to ensure efficient operation.
the mobile check stand. Section VI describes the troubleshooting procedures and
remedies. Section VII gives the instructions for removal, repair, and replacement of
components. Section VIII contains specimen-samples of the forms and records to be
used during the maintenance life of the stand.
1-1
