TM 5-6115-632-14&P
CHAPTER 4
UNIT MAINTENANCE
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
4-1.
Inspecting and Servicing Equipment. The power unit is unpacked, inspected, and serviced as
described in the following paragraphs. Unpacked equipment must be checked against the Equipment
Packing List to ensure completeness. Discrepancies must be reported in accordance with instructions
in DA Pam 738-750.
a. Unpacking Power Unit. (See figures 4-1 and 4-2.) The generator set is packed in place on the
trailer body. Before beginning the unpacking procedure, locate, remove, and save the waterproof
envelopes marked Depreservation Guide.
Figure 4-1. Uncrating Generator Set.
WARNING
Steel banding used in packaging of power unit has sharp edges. Care should
be taken when cutting and handling banding to avoid injury to personnel.
(1) Remove lag screws securing plywood box cover over generator set and lift cover off
generator. Remove wooden wedges positioned around base of generator.
4-1
