OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
Consumable Supplies. Consumable supplies used in the maintenance and operation of the
power plant are listed in Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies.
Grease, Automotive and
Oil, Lubricating, OEA
Section Il. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power plant are
contained in the applicable Lubrication Orders (LOs). Refer to DA Pam 25-30 to ensure that the latest
editions of the LOs are used.
3-3. Generator Lubrication. Refer to TM 5-6115-584-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power plant
trailer. However, the operator shall assist unit maintenance.
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
The PMCS chart in this section contains all necessary Operator/Crew
preventive maintenance checks and services for this equipment.
3-5. General. The preventive maintenance checks and services listed in Table 3-2 are grouped
according to stages of equipment operation or time intervals. Using the following as a guide, do the
checks and services at the intervals shown.
a. Before you operate, perform your before (B) PMCS. Observe all CAUTIONS and WARNINGS.