TM5-6115-630-14&P
CHAPTER 4
UNIT MAINTENANCE
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
4-1. lnspecting and Servicing Equipment. The power unit is unpacked, inspected, and serviced as
described in the following paragraphs. Unpacked equipment must be checked against the Components of End
Item and Basic Issue Items Lists to ensure completeness. Discrepancies must be reported in accordance with
instructions in DA Pam 738-750.
a.
Unpacking Power Unit. (See figures 4-1 and 4-2.) The generator set is packed in place on the trailer body.
Before beginning the unpacking procedure, locate, remove, and save the waterproof envelopes marked
Depreservation Guide.
Figure 4-1. Uncrating Generator Set.
WARNING
Steel banding used in packaging of power unit has sharp edges. Care should be taken
when cutting and handling banding to avoid injury to personnel.
(1) Remove lag screws securing plywood box cover over generator set and lift cover off generator. Remove
wooden wedges positioned around base of generator.
4-1
