Table3-2. Operator/Crew Preventive Maintenance Checks and Sevices (PMCS) (cont).
B - Before
D - During
W - Weekly
M - Monthly
Item to be inspected.
Procedure: check for and have repaired,
filled, or adjusted as needed
* BRAKE DRUMS AND HUBS
A defect in the operation of the brakes or hub
can cause these parts to get hot enough to
cause serious burns. Use extreme caution
when attempting to detect heat in this area.
Feel for overheating to detect dragging or binding.
Check for damaged or missing reflectors.
Check battery (30) electrolyte level. Level should
be about 3/4 inch above top of plates. Add water
if level is low. Use clean water (distilled water if
Equipment is not
Brakes or hub are dragging