TM 5-6115-630-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1. Consumable Supplies. Consumable supplies used in the maintenance and operation of the power
unit are listed in Table 3-1.
Table 3-1. Consumable Operating and Maintenance Supplies.
(1)
(2)
(3)
(4)
(5)
(6)
Qty
Qty
required
required
Component
National
for initial
8 hours
application
stock number
Description
operation
operation
Notes
General
6850-00-664-5685
Solvent, Drycleaning, PD-680
1 quart
As required
Cleaning
Leg Prop
9150-00-190-0904
Grease, Automotive and Artillery, GAA
1 pound
As required
Assembly
Leg Prop
9150-00-186-6681
Oil, Lubricating, OE/HDO-30
1 quart
As required
Assembly
Leg Prop
9150-00-402-4478
Oil, Lubricating, OEA
1 quart
As required
Assembly
Section Il. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power unit are contained
in the applicable Lubrication Orders (LO’s). Refer to DA Pam 25-30 to ensure the latest editions of the LO’s are
used.
3-3. Generator Lubrication. Refer to TM 5-6115-584-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power unit trailer.
However, the operator shall assist unit maintenance.
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew preventive
maintenance checks and services for this equipment.
3-1
