TM 5-6115-629-14&P
(2) Installation.
(a) Position switch (9) in switch box (5), making certain it is right side up, and secure with
four screws (10), four washers (11), and four nuts (12).
(b) Install six wires (8) on switch (9) and secure each with one nut (6) and one
Iockwasher (7).
(c) Position access cover (4) on switch box (5) and secure with 14 screws (1), 14 lock-
washers (2), and 14 flat washers (3).
b. Wiring Repair. The switch box wiring is repaired by tightening or replacing loose or damaged
terminals. The repair parts and special tools list in this manual lists part numbers for the terminals.
The replacement terminals are soldered onto the wires in accordance with procedures given in TB SIG
222 (TO 31-3-64) and TM 55-1500-323-25 (TO 1-1A-14).
5-8
