TM 5-6115-629-14&P
b. I n s t a l l a t i o n.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
5-6
Figure 5-5. Power Cable Repair.
Solder replacement contact(s) (11) on wire(s) (12).
Aline and insert contact(s)(11) into spacer (9) until contacts are fully seated.
Aline insert (10) with plug shell (8) so key on insert matches keyway in plug shell and push
insert into shell until it seats.
Aline contacts(11) with corresponding holes in insert (10) and slide contacts into insert
until spacer (9) is flush against insert (10).
Slide housing (2) up against plug shell (8) and secure with three screws (6) and three
washers (7).
Slide collar (4) and packing gland (3) up cable (5) into housing (2).
Tighten cable grip nut (1) against housing (2).
Test cable for continuity (paragraph 4-27).
