TM 5-6115-627-14&P
a.
Removal.
(1) Remove three screws (1, figure 4-6), three flat washers (2), and three nuts (3) securing accessory box
(4) to trailer frame (5).
(2) Slide accessory box (4) forward and off front step (6).
b. Installation.
(1) Position accessory box (4) on front trailer step (6) with narrow end between handbrake lever (7) and
trailer frame (5).
(2) Lift accessory box (4) so that top of box contacts lip of trailer frame (5).
(3) Insert three screws (1) down through trailer frame (5) into accessory box (4).
(4) Install one nut (3) and one washer (2) on each screw(1) and tighten.
4-20. Fire Extinguisher Bracket Replacement. (See figure 4-7.) The fire extinguishers supplied with
the power plant are carried in brackets mounted on the front roadside steps of the trailers.
Figure 4-7. Fire Extinguisher Bracket Replacement.
a. Removal.
(1) Remove four screws (1, figure 4-7), four flat washers (2), and four nuts (3) securing bracket (4) to
step (5).
4-18
(2) Remove bracket (4) from step (5).
