TM 5-6115-627-14&P
a. Removal.
(1) Remove four screws (1, figure 4-5), four nuts (2) and four flat washers (3) securing bracket (4) to
step (5).
(2) Remove bracket (4) from step (5).
b. Installation.
(1) Position fuel can bracket (4) on step (5).
(2) Insert four screws (1) down through bracket (4) and through step (5).
(3) Install one washer (3) and one nut (2) on each screw (1). Tighten hardware to secure bracket (4).
4-19. Accessory Box Replacement. (See figure 4-6.) The accessory boxes are mounted to the trailer
frames at the curbside front steps. Replacement procedures are typical.
Figure 4-6. Accessory Box Replacement.
4-17
