TM 5-6115-365-15
Section III. OPERATOR'S MAINTENANCE INSTRUCTIONS
3-7. Transfer Switch Indicating Lamps
a.
Removal. Remove lens and remove indicator or
lamp as illustrated in figure 3-8.
b.
Installation. Install the indicator lamp and lens
as illustrated in figure 3-8.
3-8. Field Expedient Repairs
Trouble
Probable cause
Remedy
Power transfer switch
Switch on terminal board
Disconnect generator sets from
will not supply power
defective
transfer cables and connect load
to load
cables directly to the individual
terminal boards of the generator sets
All data on Page 3-10, including Figure 3-5 deleted.
3-8 Change 8
