TM 5-6115-365-15
C2
FUEL SYSTEM OPERATION:
1.
CONNECT THE TWO FUEL HOSES TO THE 3-WAY SELECTOR VALVE AND CONNECT THE
OTHER ENDS TO THE ADAPTERS IN THE GENERATOR-MOUNTED FUEL CAN AND ONE OF
THE AUXILIARY FUEL CANS.
2.
POSITION THE SELECTOR VALVE TO DRAW FUEL FROM THE GENERATOR-MOUNTED FUEL
CAN. START THE GENERATOR AND BRING IT UP TO OPERATING SPEED.
3.
POSITION THE SELECTOR VALVE TO DRAW FUEL FROM THE AUXILIARY FUEL CAN.
OPERATE THE GENERATOR FOR ABOUT 4 HOURS ON THE AUXILIARY FUEL CAN; THEN
TURN THE SELECTOR VALVE TO DRAW FUEL FROM THE GENERATOR-MOUNTED FUEL
CAN.
4.
SWITCH THE ADAPTER TO ANOTHER AUXILIARY FUEL CAN AND TURN SELECTOR VALVE
BACK TO AUXILIARY FUEL SUPPLY POSITION.
NOTE:
THIS PROCEDURE PERMITS LONGER OPERATION BETWEEN REFUELING
PERIODS
Figure 6-4. Fuel system connection and transfer procedure.
6-7