TM 3-1040-280-20&P
2-11.
FRAME ASSEMBLY(CONT).
c.
Generator Support Angels.
INITIAL SETUP
Tools
General Mechanic's Tool Kit
SC 5180-90-N26
Personnel Required
One mechanic
One assistant
REMOVAL/INSTALLATION
a.
Remove smoke generators (p 2-45) and generator bracket assemblies (p 2-21).
b.
Remove front and rear support legs from support angles only (p 2-34 and 35).
c.
Remove air compressor (p 2-52, step 1).
d.
Remove 8 screws (1), 16 washers (2), and 8 nuts (3) securing generator support angles (4) to frame assembly
(5).
e.
Install generator support angles (4) on frame assembly (5) with 8 screws (1), 16 washers (2), and 8 nuts (3).
f.
Install air compressor (p 2-54, steps 1 and 2).
g.
Install front and rear support legs (p 2-34 and 35). Install generator bracket assemblies (p 2-21) and smoke
generators (p 2-47).
2-36
