TM 3-1040-280-20&P
d.
ID Plate.
INITIAL SETUP
Tools
General Mechanic's Tool Kit
SC 5180-90-N26
Materials/Parts
Abrasive cloth (item 3, app D)
Dry cleaning solvent (item 4, app D)
Polyurethane coating (item 7, app D)
Primer coating (item 5, app D)
Rag (item 8, app D)
Paint brush (item 2, app D)
REMOVAL/INSTALLATION
a.
Lift edge of plate with a sharp tool and pull plate completely off mounting surface.
WARNING
Dry cleaning solvent is flammable and toxic. Keep it away from heat or open flames. Use in well
ventilated area. Avoid breathing vapors.
b.
Thoroughly clean mounting surface with dry cleaning solvent. Mounting surface must be free of all
contamination such as oil, grease, dirt, or any foreign matter. Touchup paint as necessary (p 2-20).
c.
Peel back paper from adhesive backing on plate. Mount plate and apply pressure to plate surface.
2-37
