TM 3-1040-280-20&P
i.
Cable Assembly W1.
INITIAL SETUP
Tools
General Mechanic's Tool Kit
SC 5180-90-N26
REMOVAL
1
a.
Release two latches (1 ) securing companion seat and battery box cover (2) to battery box.
b.
Remove companion seat and battery box cover from battery box (3) by lifting front of cover up and pulling it
forward.
2
WARNING
Metal objects such as rings or tools can short circuit the battery and
cause severe burns to personnel. Remove all jewelry before starting
work. Do not allow tools to contact the vehicle when removing or
installing battery cables.
a.
Remove anchor bolt (A) securing seat belt assembly (B) to vehicle body and remove seat belt assembly.
b.
Disconnect cable assembly W1 (4) from connector 1 J 1 on control panel.
c.
Disconnect vehicle ground cable (5) and negative lead (6) of cable assembly W1 from terminal clamp (7) of
battery.
d.
Disconnect positive lead (8) of cable assembly from terminal clamp (9) of battery.
e.
Remove two screws (10) securing retainer (11 ) and grommet (12) to battery box (3).
f.
Pull cable assembly from hole in battery box. Remove retainer and grommet from cable assembly.
2-29
