Fuel Lid Assembly - TM-3-1040-280-20P

Cable Assembly W1 - TM-3-1040-280-20P_35

TM-3-1040-280-20P Mounting Kit Smoke Generator: M284 Manual
Page Navigation
31

TM 3-1040-280-20&P 2-9. M284 MOUNTING KIT (CONT). h. Fuel Lid Assembly. INITIAL SETUP Tools General Mechanic's Tool Kit SC 5180-90-N26 REMOVAL/INSTALLATION WARNING Gasoline is very flammable. Do not allow open flames, sparks, or smoking in the area while performing maintenance. a. Disconnect gas supply hose (1) and gas return hose (2) from quick-disconnect fittings at smoke generator (3). Install protective caps. b. Set lever (4) on fuel lid assembly (5) to release position and lift fuel lid assembly from gas can (6). Install cap on gas can. c. Remove cap from gas can. Insert fuel lid assembly (5) in gas can (6). Pull lever (4) up until fuel lid assembly (5) is secure in gas can. d. Remove protective caps. Connect gas supply hose (1) and gas return hose (2) to quick-disconnect fittings at smoke generator (3). 2-28

Privacy Statement
Press Release
Contact