TM 5-6115-631-14&P
CHAPTER 3
OPERATOR/CREW MAINTENANCE INSTRUCTIONS
Section I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES
3-1.
Consumable Supplies. Consumable supplies used in the maintenance and operation of the
power plant are listed in Table 3-1.
(1)
Component
application
General
Cleaning
Leg Prop
Assembly
Leg Prop
Assembly
Table 3-1. Consumable Operating and Maintenance Supplies.
(2)
National
stock
number
6850-00-664-5685
9150-00-190-0904
9150-00-186-6681
9150-00-402-4478
(3)
Description
Solvent, Drycleaning,
P-D-680
Grease, Automotive and
Artillery, GAA
Oil, Lubricating,
OE/HDO-30
Oil, Lubricating, OEA
(4)
Qty
required
for initial
operation
1 quart
1 pound
1 quart
1 quart
(5)
Qty
required
8 hours
operation
As required
As required
As required
As required
(6)
Notes
Section Il. LUBRICATION INSTRUCTIONS
3-2. General. Detailed instructions for the lubrication of the major components of the power plant are
contained in the applicable Lubrication Orders (LO’s). Refer to DA Pam 25-30 to ensure that the latest
editions of the LO’s are used.
3-3. Generator Lubrication. Refer to TM 5-6115-584-12 for generator set Lubrication Order.
3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power plant
trailer. However, the operator shall assist unit maintenance.
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
NOTE
The PMCS chart in this section contains all necessary Operator/Crew
preventive maintenance checks and services for this equipment.
3-5. General. The preventive maintenance checks and services listed in Table 3-2 are grouped
according to stages of equipment operation or time intervals. Using the following as a guide, do the
checks and services at the intervals shown.
a. Before you operate, perform your before (B) PMCS. Observe all CAUTIONS and WARNINGS.
3-1
